Skip to content
BotGigs

No card required to start. Already signed up? Sign in.

built for plant managers, operations and continuous improvement leads

AI agent for manufacturing that triages maintenance, drafts quality reports and reads your MES

Your technicians search binders and old tickets at 2 a.m., quality engineers retype the same nonconformance details into three systems, and planners chase suppliers by email. Describe the job and your stack, and BotGigs lets you post the job for a developer who has connected agents to MES, CMMS and ERP data, with a scoped plan and an honest effort band before you commit a budget.

Scoped hire brief in two minutes · US developers with plant data and ERP integration experience

Hire brief generator

hire
stack

That was the one free brief for this browser.

To hire for the job, put it on the public BotGigs job board: $99 a month on Growth, applications from specialists who apply reach your inbox, cancel any time. The board is new, so applications are not guaranteed.

Post a job, $99 a month

for a different task

Best-effort estimate, not a quote or a match

We could not scope your task just now, so this is an example brief for a different automation, shown so you can see the format. Your free brief has not been used: try again in a minute.

scope of work

who to hire

Screen for

Effort estimate

questions to ask your hire

Like the brief? Post the job on the board so specialists can apply.

short answer

An AI agent for manufacturing reads the data your plant already has (machine alarms, maintenance history, work instructions, quality records, open purchase orders) and prepares the next action for a person to approve. Budget $15,000 to $35,000 for a read-only assistant and $35,000 to $90,000 once it drafts work orders or nonconformance reports inside your CMMS or ERP. It never controls equipment, and the NIST AI Risk Management Framework is a sensible checklist for where a person must stay in the loop.

Use cases

Where a manufacturing agent pays back first

Good first jobs share three traits. They happen dozens of times a week, a supervisor already reviews the output, and the cost of a wrong draft is a few minutes of rework, not scrap or downtime.

maintenance

Maintenance triage

Reads the alarm code, the asset history and the manual, then drafts a work order with likely causes, parts and the last fix that worked.

quality

Nonconformance reports

Turns an inspector note and photos into a structured report, links the lot and the supplier, and suggests the containment step from past cases.

handover

Shift handover summaries

Pulls downtime, scrap and open issues from the MES and writes a one page handover the next shift lead can read in two minutes.

instructions

Work instruction answers

Answers an operator question from the current revision of your SOPs and cites the page, so nobody works from an old printout.

suppliers

Supplier follow-up

Watches late purchase order lines, drafts the chase email with the PO and promised date, and logs the reply for the planner.

planning

Schedule impact notes

When a machine goes down or material slips, lists the affected orders and suggests resequencing options for the planner to accept or reject.

Visual inspection is a separate build with cameras and trained models. Scope and pilot costs for that are on computer vision development services and in the defect detection pilot cost breakdown.

Worked example

Maintenance triage at a 60 machine plant

Assumptions to replace with your own. A plant logs 400 unplanned maintenance calls a month. Today a technician spends 25 minutes per call finding the history, the manual page and the right part before any wrench turns. Fully loaded technician time is $55 an hour. The agent cuts the search to 10 minutes on 70 percent of calls. Build cost is $45,000 and run cost is $900 a month.

Item Figure
Calls helped by the agent280 a month
Minutes saved per helped call15
Technician hours saved70 a month
Labor value saved$3,850 a month
Net after run cost$2,950 a month
Payback on a $45,000 buildAbout 15 months on labor alone

Labor is the smaller half of the case. Those 15 minutes are also 15 minutes of a down machine. If the line earns $600 an hour of contribution and only a third of helped calls are on a constraint machine, recovered uptime adds roughly $14,000 a month and payback drops to about three months. Run the same numbers at 60 calls a month and the build does not pay back, so a vendor assistant or a better CMMS search is the cheaper fix. The general rent or build test is in build vs buy an AI agent.

Honest comparison

Custom agent, vendor assistant or a systems integrator

Route How you pay Best for Where it falls short
Custom agent built by a developerOne time build plus model and hostingJobs that span MES, CMMS, ERP and document storesNeeds clean asset IDs and a supervisor who reviews drafts
Assistant from your MES or ERP vendorPer user or added to the licenseQuestions that live inside one vendor systemBlind to PDFs, old tickets and the other systems on the floor
Large systems integratorProgram fee, often six figuresMulti-plant rollouts with a transformation budgetSlow to start and costly for a single plant pilot

A small first step is often a two to four week pilot on one line. How we scope those is on AI proof of concept development, and the data you should pull together before anyone writes code is in the data readiness checklist. If purchasing is the bottleneck rather than the floor, the cost math for supplier and PO work is in AI agent for procurement cost.

Cost

Realistic 2026 US cost bands

Scope Typical band What drives it
Read-only assistant over SOPs, manuals and maintenance logs$15,000 to $35,000Document volume, revision control, on site hosting
Drafting work orders or NCRs in your CMMS or ERP$35,000 to $90,000API access, asset master quality, approval flow, audit log
Several plants, scheduling support and a review dashboard$90,000 and upEvaluation set per site, monitoring, integration count

Planning bands from scoping conversations, not a quote. Rates by specialty are on hire AI engineers.

How it works

From one painful job to a working plant agent

01

Describe the job and the systems

Name the task, how often it happens, and where the data lives (MES, CMMS, ERP, shared drives). The hire brief turns it into a scoped plan with an effort band.

02

Post the job for a developer

Developers who have worked with plant data and ERP integrations can apply to your post with their proposed scope. The board is new, so applications are not guaranteed.

03

Pilot one line and measure

Grade 50 drafts against what your supervisor would have written, then widen to more lines or a second task.

Questions

AI agent for manufacturing questions, answered

How much does an AI agent for manufacturing cost?

A read-only agent that answers questions from work instructions, maintenance logs and the MES typically costs $15,000 to $35,000 to build in the US. Agents that draft work orders or nonconformance reports in your ERP or CMMS run $35,000 to $90,000. Add $400 to $1,500 a month for model usage and hosting. These are planning bands, not a quote.

What can an AI agent do on a factory floor?

It reads machine alarms, maintenance history and work instructions, then prepares the next step: a triaged work order, a draft nonconformance report, a shift handover summary or a supplier chase email. It does not run machines. Anything that touches equipment control stays with your existing PLC and safety systems.

Does a manufacturing AI agent need our data in the cloud?

No. Many plants keep MES and historian data on site. A developer can run retrieval and the agent inside your network and send only the text of a question to a model provider, or use a model hosted on your own servers. Decide this before scoping, because it changes cost.

Should we buy a platform or build a custom agent?

Buy when your MES or ERP vendor already ships an assistant that reads the data you care about. Build when the job spans several systems, depends on tribal knowledge in PDFs and logs, or when per-user platform fees across a plant exceed a one time build over two years.

Which manufacturing task should we automate first?

Start with maintenance triage or shift handover summaries. Both have a checkable output, low safety risk and a supervisor who reviews the result anyway. Add drafting inside the CMMS or ERP next. Leave anything that changes a schedule or a purchase order until a month of reviewed output shows it is reliable.

Get started

Scope your manufacturing AI agent before you commit a budget.

Describe the plant job and your systems in the hire-brief demo, then create your account to post the job for a developer with MES and ERP experience.

No card required to start.

BotGigs is a new board. Listed today: 2 screened specialists, 0 agents in the library and 0 open jobs on the board. A job post does not guarantee applications.